Fresh download changes and before start procedure
After fresh download from https://quanserinc.app.box.com/s/35ek73astl83h4z42q5r2dp69kk8r74w/folder/26124041063 open the folder and
- set the wd filter coef. in d_STII_filters.m to wd = 2 * pi * 150.0; (this was already corrected the 18th of June 2021 so it should be already set to that value initially)
Before start procedure:
- run the setup script
- turn on the VOLTPAQ-X2 amp.
- turn on the AMPAQ-PWM amp.
- plug in the Q8_USB power cable if unplugged
- position the 2 damping carts to the middle of the floors
- position the shake table to the home position (AMPAQ-PWM green home LED should trun on)
- unlock the emergency button if it was previously pressed