Commit f30d46bf authored by Ille, Ondrej, Ing.'s avatar Ille, Ondrej, Ing.

Removed obsolete signal.

parent 5dd2be29
......@@ -230,6 +230,10 @@
-- is logical to do it like so!
-- 2. Removed "bit_err_ena" since it was unused! Selection of
-- valid bit error is done by Fault confinement!
-- 13.8.2018 fixed_CRC_FD removed since fixed stuff bit before CRC field
-- is inserted by Bit Stuffing and discarded by Bit Destuffing
-- automatically upon detection of 0 -> 1 transition on
-- "fixed_stuff" / "fixed_destuff" signals.
--------------------------------------------------------------------------------
Library ieee;
......@@ -661,12 +665,6 @@ entity protocolControl is
--Recieved CRC matches the calculated one
signal crc_check : std_logic;
--Fixed stuff bit before CRC of FD Frame
signal fixed_CRC_FD : std_logic;
--Fixed stuff bit before CRC of FD Frame, for reciever
signal fixed_CRC_FD_rec : std_logic;
--Pointer for transcieving the stuf length field
signal stl_pointer : natural range 0 to 3;
......@@ -996,8 +994,6 @@ begin
sp_control_r <= NOMINAL_SAMPLE;
ssp_reset_r <= '0';
trv_delay_calib_r <= '0';
fixed_CRC_FD <= '0';
fixed_CRC_FD_rec <= '0';
sync_control_r <= NO_SYNC;
--Error presetting
......@@ -1102,8 +1098,6 @@ begin
sec_ack <= sec_ack;
interm_state <= interm_state;
err_frame_state <= err_frame_state;
fixed_CRC_FD <= fixed_CRC_FD;
fixed_CRC_FD_rec <= fixed_CRC_FD_rec;
err_pas_bit_val <= err_pas_bit_val;
data_tx_index <= data_tx_index;
......@@ -2219,8 +2213,6 @@ begin
to_unsigned(FD_STUFF_LENGTH, 3));
destuff_length_r <= std_logic_vector(
to_unsigned(FD_STUFF_LENGTH, 3));
fixed_CRC_FD <= '1';
fixed_CRC_FD_rec <= '1';
----------------------------------------------------------------
-- Go to stuff count transmission if ISO FD is configured.
......@@ -2234,8 +2226,6 @@ begin
end if;
else
fixed_CRC_FD <= '0';
fixed_CRC_FD_rec <= '0';
crc_state <= real_crc;
crc_enable_r <= '0';
end if;
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment