Bench fix. We must wait for one clock cycle less. If We wait

for 3, we wont start the transmission right after the Intermission
by Node 2, because the frame will be inserted after sample point,
and thus Node 2 will send it after 1 bit of being Idle.

test/feature/suspend_transmission_feature_tb.vhd

@@ -51,13 +51,14 @@
 --          5. Wait until Node 1 starts transmission.
 --          6. Insert frame to Node 2.
 --          7. Wait until frame is transmitted by Node 1 (end of EOF).
---          8. Wait for 3 Bit times, to compensate for Intermission field!
+--          8. Wait for 2 Bit times, to compensate for Intermission field! see
+--              further explanation!
 --          9. Wait for N Bit times (suspend field).
 --         10. Give command to Node 2 to start Transmission.
 --         11. Check that Node 1 did become receiver, not transmitter although
 --             it has frame for transmission available. It can become transmi-
---             tter only if we waited more than 7 bits! Break out of loop in
---             this case and check that N=8!
+--             tter only if we waited more than 7 bits (length of Suspend)!
+--             Break out of loop in this case and check that N=8!
 --
 --  Just found out that Gedit supports insertion of emojis. Lets see how
 --   this is gonna work... 🙄🤔😳🤤
@@ -194,9 +195,18 @@ package body suspend_transmission_feature is
             report "End of EOF field";
             wait for 20 ns;
 
-            -- Wait for N + 3 Bit times. 3 is length of intermission,
-            -- remaining N bits are prolongging Suspend field!
-            CAN_wait_n_bits(n + 3, true, ID_1, mem_bus(1));
+            --------------------------------------------------------------------
+            -- Wait for N + 2 Bit times. 3 is length of intermission. Thus if
+            -- we wait 2 bit times, we insert the frame in the last bit of
+            -- Intermission and Node 2 will start transmission right after
+            -- the end of Intermission.
+            -- If we wait for 3 bit times, we mark the frame as valid during
+            -- first bit of Idle, and start frame one bit after the end of
+            -- intermission.
+            -- Thisway when N equals to number of bits we waited after the 
+            -- end of intermission.
+            --------------------------------------------------------------------
+            CAN_wait_n_bits(n + 2, true, ID_1, mem_bus(1));
             report "Waited " & integer'image(n) & " bits";
 
             -- Give command to the frame in Node 2 for transmission!