Commit b1064ca7 authored by Ille, Ondrej, Ing.'s avatar Ille, Ondrej, Ing.

Corrected feature test environment setup.

Added Interrupt manager signals.
parent 84ea1208
...@@ -89,6 +89,11 @@ add wave -group "RX Buffer (1)" \ ...@@ -89,6 +89,11 @@ add wave -group "RX Buffer (1)" \
-label "Write pointer" -unsigned $TCOMP/$INST1/rx_write_pointer_pos \ -label "Write pointer" -unsigned $TCOMP/$INST1/rx_write_pointer_pos \
-label "Data overrun" -unsigned $TCOMP/$INST1/rx_data_overrun -label "Data overrun" -unsigned $TCOMP/$INST1/rx_data_overrun
add wave -group "Interrupt manager (1)" \
-label "Interrupt vector" $TCOMP/$INST1/int_vector \
-label "Interrupt enable" $TCOMP/$INST1/int_ena \
-label "Interrupt mask" $TCOMP/$INST1/int_mask
add wave -group "Frame to transmit (1)" \ add wave -group "Frame to transmit (1)" \
-label "Frame is valid" $TCOMP/$INST1/tran_frame_valid_out \ -label "Frame is valid" $TCOMP/$INST1/tran_frame_valid_out \
-label "data" -hexadecimal $TCOMP/$INST1/tran_data_out \ -label "data" -hexadecimal $TCOMP/$INST1/tran_data_out \
...@@ -169,11 +174,11 @@ add wave -group "Bus sampling (1)" \ ...@@ -169,11 +174,11 @@ add wave -group "Bus sampling (1)" \
add wave -noupdate -divider -height 20 "Node 2" add wave -noupdate -divider -height 20 "Node 2"
quietly set INST1 "can_inst_2" quietly set INST1 "can_inst_2"
add wave -label "Memory bus" $TCOMP/mem_bus_1 add wave -label "Memory bus" $TCOMP/mem_bus_2
add wave -label "CAN_TX" $TCOMP/can_tx_1 add wave -label "CAN_TX" $TCOMP/can_tx_2
add wave -label "CAN_RX" $TCOMP/can_rx_1 add wave -label "CAN_RX" $TCOMP/can_rx_2
add wave -label "Interrupt" $TCOMP/int_1 add wave -label "Interrupt" $TCOMP/int_2
add wave -label "Transciever delay" $TCOMP/tr_del_1 add wave -label "Transciever delay" $TCOMP/tr_del_2
add wave -label "Driving bus" $TCOMP/$INST1/drv_bus add wave -label "Driving bus" $TCOMP/$INST1/drv_bus
add wave -label "Status bus" $TCOMP/$INST1/stat_bus add wave -label "Status bus" $TCOMP/$INST1/stat_bus
...@@ -188,6 +193,11 @@ add wave -group "RX Buffer (2)" \ ...@@ -188,6 +193,11 @@ add wave -group "RX Buffer (2)" \
-label "Write pointer" -unsigned $TCOMP/$INST1/rx_write_pointer_pos \ -label "Write pointer" -unsigned $TCOMP/$INST1/rx_write_pointer_pos \
-label "Data overrun" -unsigned $TCOMP/$INST1/rx_data_overrun -label "Data overrun" -unsigned $TCOMP/$INST1/rx_data_overrun
add wave -group "Interrupt manager (2)" \
-label "Interrupt vector" $TCOMP/$INST1/int_vector \
-label "Interrupt enable" $TCOMP/$INST1/int_ena \
-label "Interrupt mask" $TCOMP/$INST1/int_mask
add wave -group "Frame to transmit (2)" \ add wave -group "Frame to transmit (2)" \
-label "Frame is valid" $TCOMP/$INST1/tran_frame_valid_out \ -label "Frame is valid" $TCOMP/$INST1/tran_frame_valid_out \
-label "data" -hexadecimal $TCOMP/$INST1/tran_data_out \ -label "data" -hexadecimal $TCOMP/$INST1/tran_data_out \
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment